CPE-890DH is a high power industrial 5G outdoor CPE with 10KM PTP/PTMP range. Comply with the next generation 802.11ac Wi-Fi standard, Qualcomm Chipset, combined 900Mbps high speed in 5.8G, equipped Gigabit WAN port, 3 times Ethernet data rate faster than 300Mbps model; It with LED display to show and configure CPE’s operation mode, Channel, IP address and Signal Strength, simple to do the Point to Point connection by reset button, no need to access into GUI.

900Mbps Data Rate & Gigabit WAN/LAN Ports 
CPE-890DH features 802.11ac Wi-Fi and 2*2 MIMO technology, 900Mbps wireless speed. Equipped with Gigabit Ethernet port ensures high speed internet access and more end users access.

5GHz frequency, more channels, lower latency, higher stability
CPE890DH with full frequency of 5020~6100MHz, more than 200 channels available, it avoid the frequency interference problem, full meet with data transmission in fast speed, low delay, high stability requirement in wireless security or data transmission.

10KM PTP/PTMP Distance  
Designed in two line Power Amplifier on PCB board, the power can be 500mW high power, 18dBi MIMO high gain panel antenna, greatly increase the Wi-Fi range to 10KM distance, then supply the stable Wi-Fi signal for users. 

LED Display
CPE-890DH with LED display to show AP/Client operation mode, Channels, IP address and RF Power; What’s more, it is easy to setup CPE-890DH operation mode, IP address, Channels by set switch on product, no need to access into GUI, avoid the complex setup program, simple to check the working status.

Power over Ethernet
CPE-890DH has integrated passive Power over Ethernet (PoE)(IEEE802.3af 48V PoE is optional), for easy installation and lower cost. So it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.